Whenever a signal is sampled below Nyquist rate (fs < 2B), the signal is called under sampled and the Aliasing effect hampers the results.
-
-
The Circular Convolution can be performed using two basic methods which are concentric circle method and matrix multiplication method.
-
In order to make communication more safer and reliable digital signals are used. The basic digital modulation techniques are ASK, PSK,FSK and MSK
-
Watchdog timer is a hardware microcontroller. It is basically used to take out a system from an infinite loop and resets the system.
-
The IC 555 timer is an 8 pin chip. It is used in applications such as multivibratiors. It operates in astable, bistable and monostable mode.
-
The losses in transformer are listed below. Some of them occur due to alternating flux or due to ohmic resistance in the windings.
-
TDMA (Time division multiple access) is used where there is no need for continuous transmission. Due to this it can be used instead of FDMA.
-
The Programmable Interrupt controller is also known as PIC micro-controller. It is used as interfacing device. It has different operating modes.
-
In JK flip flop when both J=K=1 the output toggles as long as clock high. This makes the output unstable. This is called race around condition.