Laplace Transform is a method used for solving differential equations. The Dirichlet condition defines the necessary condition for transform
Engineering
-
-
The 8051 interrupts are INT0, INT1,TO ,T1 , TI/RI. All these interrupts are controlled by IE (interrupt enable) register.
-
A controller which controls the motor is called Variable Frequency Drive. By varying the frequency and voltage of supply it controls the motor
-
The main components of Phase Locked Loop are a phase detector with a voltage controlled oscillator. It also has loop filter feedback.
-
Whenever a signal is sampled below Nyquist rate (fs < 2B), the signal is called under sampled and the Aliasing effect hampers the results.
-
The Circular Convolution can be performed using two basic methods which are concentric circle method and matrix multiplication method.
-
curve tracing- a picture speaks more clearly than words and numbers. A curve which is the image of functional relationship gives us a lot information about the relation.
-
In order to make communication more safer and reliable digital signals are used. The basic digital modulation techniques are ASK, PSK,FSK and MSK
-
A matrix is the rectangular arrangement of arrays, that we arrange in rows and columns. the term “Matrix” was coined by James Joseph Sylvester in 1850. In this blog we are going to discuss about the matrix operations