Unit- 2

Behaviour of continuous and discrete time LTI systems
 

2.1 Impulse Response and Step Response

If the input to the system is unit impulse response, then the output of the system is known as impulse response of the system denoted by h(n). That is

h(n) = T [ δ(n)] …………………………………………………………. (1)

The arbitrary sequence x(n) can be represented as weighted sum of discrete impulses given by

x(n) = δ(n-k) --------------------------------------------(2)

Then the output

y(n) = T [  δ(n-k)] -----------------------------------------------------(3)

Figure 1. Step response

The step response of a discrete-time LTI system is the convolution of the unit step with the impulse response-

s[n]=u[n]*h[n]. -------------------(1)

commutative property of convolution,

s[n]=h[n]*u[n]. ----------------------------------------(2)

That means s[n] is the response to the input h[n] of a discrete-time LTI system with unit impulse response u[n].

Figure 2. LTI discrete time

s[n] = u[n-k] ------------------------------------(1)

Therefore, -----------------------------------------------(2)

That is the step response of the discrete LTI system is the running sum of its impulse response.

s[n-1] =

s[n] – s[n-1] = -

h[n] = s[n] – s[n-1]

From here h[n] can be recovered from s[n], the impulse response of discrete-time LTI system is the first difference of its step response.

For continuous time system

The unit step response is the running integral of its impulse response.

s(t) = ) dτ

The unit impulse response is the first derivative of the unit step response: -

h(t) = ds(t)/dt = s’(t)

2.2 Convolution

The input signal to the system is x(n) and the output is y(n).

Figure. I/O relation

If the input to the system is unit impulse, then the output of the system is known as impulse response of the system denoted by h(n).

h(n) = T [ ∂(n)]

The arbitrary sequence x(n) can be represented aa a weighted sum of discrete impulses given by

x(n) =   ∂(n-k)

Then the output

y(n) = T [    ∂(n-k)]

Using linear property of the system, interchange the system operator T with the summation x(k) to obtain

y(n) = T [ ∂(n-k)]

Now

y(n) =  h(n,k)

For a time-invariant system

h(n,k) = h(n-k)

Therefore

 y(n) =  h(n-k)

Thus, the output of the LTI system is given by the weighted sum of the time-shifted responses.

This sum is termed as convolution sum represented as

y(n) = x(n) * h(n) where * denotes convolution. 

Problem:

The impulse response h[n] of a discrete-time LTI system. Determine and sketch the output y[n] of this system to the input x[n]

Key Take Aways:

Convolution is important because it relates the three signals of interest: the input signal, the output signal, and the impulse response.

2.3 Input-Output Behaviour with periodic convergence inputs

If we input a periodic input signal (expressed with its Fourier Series to a stable LTI system, using superposition, we can write down the output as a second Fourier Series:

Figure.4 Periodic input signal

Where,

  H(jkwo) =   e -jkwot d

Key Take away:

y(t) is also a Fourier Series with Fourier Series coefficients CkH(jkω0)

2.4 Cascade Interconnections

Consider the cascade connection of two LTI systems, as illustrated in Fig. (a). Let z(t) be the output of the first system and therefore the input to the second system in the cascade.

The output is expressed in terms of z(t) as 𝑦 (𝑡) = 𝑧(𝑡)∗ℎ2(𝑡)

Substituting for z(t), we get

y(t) = h2(t-τ) dτ

Putting for z(t) we get

y(t) =  h1(τ-v) h2(t-τ) dv dτ

= h(t-τ) dv

Figure 5. Cascade connection

Interconnection of two LTI systems. (a) Cascade connection of two systems. (b) Equivalent system. (c) Equivalent system: Interchange system order.

Problem:

Consider the interconnection of four LTI systems as shown in figure. The impulse responses of the systems are

h1[n] = u[n]

h2[n] = u[n+2] – u[n]

h3[n] = δ[n-2]

and

h4[n] = αn u[n]

Find the impulse response h[n] of the overall system.

Figure6. Impulse response h[n]

We first derive the expression for the overall impulse response in the terms of impulse response of each system.

The parallel com0bination h1[n] and h2[n]. The distributive property implies that the equivalent system h12[n] = h1[n] + h2[n] as shown in figure 1.

Figure 7. Reduction

This system is in series with h3[n] so the associative property implies that the equivalent system for the upper branch has the impulse response h123[n] = h12[n] * h3[n]

Substituting for h12[n] in this expression we have

h123[n] = (h1[n] + h2[n] * h3[n]) as shown in fig(b) . Last the upper branch is in parallel with the lower branch characterized by h4[n] ; hence application of the distributive property gives the overall system impuse response as h[n] = h123[n] – h4[n]

Substituing for h123[n] in this expression yields

H[n] = ( h1[n] + h2[n] ) * h3[n] – h4[n]

As shown in fig ( c)

Now substitute the specified forms h1[n] and h2[n] to obtain

h12[n] = u[n] + u[n+2] – u[n]

=u[n+2]

Convolving h12[n] with h3[n] gives

h123[n] = u[n+2] * δ[n-2] = u[n]

Finally, we sum h123[n] and -h4[n] to obtain the overall impulse response

h[n] = {1- αn} u{n}

Figure 8. Output response

Key Take Away:

Systems can be combined to form more complex systems otherwise known as the interconnection of systems. 

2.5 Characterization of Causality and Stability of LTI systems

Stability:

A system is said to be stable if a bounded input sequence produces bounded output sequence. For bounded input sequence x(n) if the output is unbounded the system is said to be unstable system.

Let x(n) be a bounded input sequence satisfying |x(n) | ≤ Mx < ∞. Let h(n) be the impulse response of the system then the output y(n) can be found by convolution sum. That is

The magnitude of the output is given by

|y(n)| = |   x(n-k)|-------------------------(2)

We know that the magnitude of the sum of terms is less than or equal to the sum of the magnitudes, hence

Let the bounded value of the input be equal to M then eq (3) can be written as

|y(n) | ≤ M |------------------------------(4)

The above condition is satisfied when

| < ∞ ------------------------(5)

Therefore, the necessary and sufficient condition for stability is

| < ∞ -----------------------(6)

Therefore, the LTI system is stable if its impulse response is absolutely summable.

Causality:

If x(t) = ∂(t) then according to convolution theorem

y(t) = x(t) * h(t) = h(t) * ∂(t) = h(t)

A casual system is one where the output at the present instant does not anticipate input from future instants.

X(t) , t<to ------- y(t) , t<to

An LTI system is casual if and only if

h(t) = L (δ(t)) = 0, t<0

The impulse response of the system has to be zero for negative time for the system to be casual.

For discrete time system the impulse response of the sequence h[n] of LTI system has to be right -sided sequence

h[n] = L (δ[n]) = 0, n<0

For the given impulse response h(n) of the system determine if the system is casual or stable.

h(n) = 2 n u(-n) 

The given system is non casual since h(n) ≠0 for n<0. For stability the impulse response must be absolutely summable.

Hence system is stable

Key Take away:

For a LTI system to be bounded input bounded output (BIBO) stable, every bounded signal should produce a bounded output.

2.6 System Representation through differential and difference system.

An LTI system is specified by equation

Find the natural response for initial conditions:

y (0+) = 3       d y (0+)/dt =0

Forced response

Total response.

The natural response can be obtained by equating input terms in differential equation to zero.

d 2 y(t) / dt 2 + 5 d y(t)/dt + 6 y(t)=0

The characteristic equation is

• 2 + 5 + 6=0

• 1=-2 and 2 = -3

The homogenous solution is

yh(t) = c1 e -2t + c2 e -3t

y (0+) = c1 + c2

d y (0+)/dt = 2 c1 e -2t + (-3) c2 e -3t |t=0

= 2c1 – 3c2

From initial conditions

y (0+) = 3

dy (0+)/dt =0

Comparing we get c1 + c2 =3

                                     2c1 + 3c2 =0.

c2 =-6 and c1=9

yn(t) = 9 e -2t – 6 e -3t

Forced response:

The homogeneous solution is given by

yn(t) = c1 e -2t + c2 e -3t

for input x(t) = e -t

The particular solution is of the form

yp(t) = k e -t

from which

dyp(t)/dt = -k e-t

d2 yp(t)/dt2 = k e-t

Therefore,

K=1.5

yp(t) = 1.5 e -t.

The forced response is the sum of homogeneous solution for particular solution.

yf(t) = c1 e -2t + c2 e -3t + 1.5 e -t

y (0+) = c1 + c2 +1.5

dy (0+)/dt = -2c1 e -2t -3 c2 e -3t – 1.5 e -t |t=0

To obtain forced response equate initial conditions to zero

C1 + C2 = -1.5

2C1 + 3C2 = -1.5

Solving for c1 and c2 we get

C2 = 1.5

C1 =-3

 y(t) = yn(t) + yf(t)

Substituting yn(t) and yf(t) we get

  y(t) = 6 e -2t – 4.5 e -3t + 1.5 e -t

y (0) = c1 + c2 + 1.5 =3

dy (0+)/dt = -2c1 -3c2 -1.5 =0

c1 =6 and c2 =-4.5

y(t) = 6 e -2t -4.5 e -3t + 1.5 e -t

Problem:

Consider the difference equation given by

y[n] + 0.5 y[n-1] = (-0.8) n u[n]

The solution is composed of natural response and forced response of the system.

y[n] = yh[n]+yp[n]

Where the particular solution satisfies for n≥0 and the homogeneous solution satisfies

yh[n] + 0.5 yh[n-1] = 0

for n ≥0 yp(n) = y (-0.8) n

Then we get

Y (-0.8) n + 0.5Y (-0.8) n-1 = (-0.8) n

Y [ 1+0.5(-0.8) -1] = 1

Y=8/3

which yields yp(n) = 8/3 (-0.8) n

To determine yh(n)

Yh[n] = A z n

1+ 0.5 z -1 =0

z=-0.5

Key Take away:

They are used in circuit analysis, filter design, controller design, process modelling, and in many other applications.

2.7 State Space Representation of Systems

For LTI system with output signal y(t) with input signal u(t) and impulse response h(t).

Therefore, y(t) = h(t) * u(t) -> Y(s) = H(s) U(s)

This representation of the system expresses the input output relation. It does not provide us the internal specification of the system.

State space representation not only provide information on I/O but also gives good view on the internal specification of the system.

The states of the system at time to includes min required information to express the system situation at time to. These are the first- degree equations.

State space representation of LTI system is given by

= AX(t) + B U(t) ------ state equations

Y(t) = CX(t) + DU(t) --------- output equations

X R n : state vector

U R m : input vector

Y R p  : output vector

A nxn: System Matrix

B nxm: Input matrix

C pxn: Output matrix

D pxm: Coupling matrix

Number of states usually equals to degree of the system.

Set of states in not unique for the system.

Figure.9 State Space Representation

Key Take away:

A state-space representation is a mathematical model of a physical system as a set of input, output and state variables 

2.8 State Space Analysis

The state of a dynamic system is the minimum set of variables called the state variables which if known at time to along with input the system behaviour at t>to can be determined.

A dynamic system represented by a nth- order differential equationcan be split into n first order equations which represents a state model. The model consists of chosen state variables x1, x2, xn, the input u and an output y (for single input single output system).

The state model representation of the system is

= AX + Bu

Y= CX +Du where

X is (x1, x2, x3……………………….xn) – matrix of state variables called State matrix

A is a (nxn) matrix called Co-efficient matrix

B is a(nx1) matrix called Driving matrix

C is (1xn) matrix called Output matrix

D(nx1) matrix called Transmission matrix

U is the input and y is the output.

The state variables are the minimum set of variables. The choice of the variables in the first order equation may be different which leads to different state model of the same system.

Consider a transfer function

C(s) /R(s) = k/ (s 2 + as +b)

+ a+ bc = k.r

The above equations can be written as

[]   = [ 0     1][x1]   + [0] u

[] =  [-b    -a] [x2]     [k]

y [ 1    0] [ x1]

                        [x2]

Or

[]  = AX + Bu

y = CX + Du

is the state model of the second order system?

Key Take away:

State Space analysis also known as state variable analysis is a commonly used method nowadays for analysing the control system.

2.9 Multi Input -Output Representation

The state model of a linear, time-invariant MIMO system is a special case of the general time-invariant state model of Equations. In state representation, the derivative of each state variable can be written as a linear combination of system states and inputs i.e.

Similarly, the output variables can be written as a linear combination of system states and inputs that is

where coefficientscij = i=1,2,p; j=1,2,p: k=1,2,m are constants.

In vector form

y(t)= Cx(t) + D u(t) ---------Output Equation.

Key Take away:

MIMO systems that are lumped and linear can be described easily with state-space equations. 

2.10 State Transition Matrix and its Role

The state transition matrix is important part of both the zero input and the zero state solutions of systems represented in state space.  The state transition matrix in the Laplace Domain, Φ(s), is defined as:

where I is the identity matrix.  The time domain state transition matrix, φ(t), is simply the inverse Laplace Transform of Φ(s).

For Example,

Find Φ(s) and φ(t) if 

Solution:

The inverse of a 2×2 matrix is

To find φ(t) we must take the inverse Laplace Transform of every term in the matrix

Using partial fraction expansion of each term we get

Problem:

Find the transfer function for the state model given by

[]= [ 0    1] [x1]    + [0] u(t)

[]    [-3   -2] [x2]      [2]

y= [1 0] [x1]

               [x2]

Y(s)/U(s) = C(SI-A) -1 B + D

[ 1     0] [ s      -1] -1 [0]   + 0

               [3    s+2] [2]

SI -A = s [1 0]- [ 0    1]

                [0   1] [-3    -2]

= [ s     -1]

[ 3   s+2]

= [ 1   0]   1/ s(s+2) + 3 [ s+2     1] [0]

                                            [-3        s] [2]

= 1/ s2 +2s +3 [ s+2     1] [0]   = 2/ s2 + 2s + 3

                                               [2]

Hence T.F Y(s)/U(s) = 2/ s2 + 2s +3 given state space model.

Key Take away:

The state transition matrix is an important part of both the zero input and the zero state solutions of systems represented in state space. 

2.11 Periodic Inputs to LTI system

Figure10. Periodic input to LTI system

A periodic signal with period No can be decomposed into sum of complex exponential signal

    x[n] =    e j.2πk/No .n

where,

Key Take Aways:

When we apply a periodic input to a linear, time-invariant system, the output is periodic and has Fourier series coefficients equal to the product of the system's frequency response and the input's Fourier coefficients

2.12 Notion of frequency response and its relation to impulse response

The output given by the convolution sum is

y(n) =   x (n-m) --------------------------(1)

Suppose that the input is a complex exponential function, where for all n ∈ Integers, then

x(n) = e jwn ----------------------------------(2)

Then

y(n)= ejw(n-m) -----------(3)

= e jwn e-jwm-------(4)

When the input is the complex exponential with frequency ω , then the output is given by

y(n) = H(w) e jwn  -----------------------(5)

where H(ω ) is called the frequency response.

Comparing these two expressions for the output we see that the frequency response is related to the impulse response by

   H(w) = eimw-----------(6)

H(ω ) is called the discrete-time Fourier transform (DTFT) of h(n).

Key Take away:

The frequency response exists if the LTI system is a stable system.

References:

1. Signals and Systems by Simon Haykin
2. Signals and Systems by Ganesh Rao
3. Signals and Systems by P. Ramesh Babu
4. Signals and Systems by Chitode