Unit – 4

Periodic Properties

4.1 Periodic table:

The arrangement of atoms in the tabular form for identification of their properties such as their atomic number, atomic weight, electronic configuration and other chemical properties. The elements are arranged in periods and groups form. The seven row that exist in the periodic table are called as the periods that contains elements with similar behavior. Six groups have accepted names as well as assigned numbers: for example, group 17 elements are the halogens; and group 18 is the noble gases. Also displayed are four simple rectangular areas or blocks associated with the filling of different atomic orbitals.

Each chemical element has a unique atomic number (Z) representing the number of protons in its nucleus. Most elements have differing numbers of neutrons among different atoms, with these variants being referred to as isotopes. For example, carbon has three naturally occurring isotopes: all of its atoms have six protons and most have six neutrons as well, but about one per cent has seven neutrons, and a very small fraction have eight neutrons. Isotopes are never separated in the periodic table; they are always grouped together under a single element. Elements with no stable isotopes have the atomic masses of their most stable isotopes, where such masses are shown, listed in parentheses.

4.2 Atomic and ionic radii:

Atomic radii 

Atomic radiusis the radius of spherical atoms. Nonbonding atoms have a larger, more undefined radius, so when atomic radius is discussed as a periodic trend, what's usually meant is bonding atomic radius. These are the radius of atoms that are chemically bonded to one another. So, if the bond between two Cl atoms in Cl2 is 1.99 angstroms, we report chlorine's bonding atomic radius as about 0.99 angstroms. Further these values to estimate bond lengths between different elements in molecules.

Ionic Radii

Ionic radii are the radii of ions of elements. These distances are based on distances between ions in ionic compounds.Cations, or positively charged ions, are smaller than their "parent" atoms. This is because cations are formed when those outermost orbitals are vacated of electrons. This also decreases electron-electron repulsions. Therefore, the resulting ions are smaller as there are not as many occupied orbitals and the effective nuclear charge affecting the remaining electrons increases, pulling electrons in more closely.

4.3 Ionization energies:

Ionization energy is the quantity of energy that an isolated, gaseous atom in the ground electronic state must absorb to discharge an electron, resulting in a cation.

H(g)→H+(g)+e−(1)(1)H(g)→H+(g)+e−

This energy is usually expressed in kJ/mol.

When considering an initially neutral atom, expelling the first electron will require less energy than expelling the second, the second will require less energy than the third, and so on. Each successive electron requires more energy to be released. This is because after the first electron is lost, the overall charge of the atom becomes positive, and the negative forces of the electron will be attracted to the positive charge of the newly formed ion. The more electrons that are lost, the more positive this ion will be, the harder it is to separate the electrons from the atom.

Periodic Table and Trend of Ionization Energies

Ionization energies are dependent upon the atomicradius. Since going from right to left on the periodic table, the atomic radius increases, and the ionization energy increases from left to right in the periods and up the groups. Exceptions to this trend are observed for alkaline earth metals (group 2) and nitrogen group elements (group 15). Typically, group 2 elements have ionization energy greater than group 13 elements and group 15 elements have greater ionization energy than group 16 elements. Groups 2 and 15 have completely and half-filled electronic configuration respectively, thus, it requires more energy to remove an electron from completely filled orbitals than incompletely filled orbitals.

Alkali metals (IA group) have small ionization energies, especially when compared to halogens group. In addition to the radius, the number of electrons between the nucleus and the electron in the outermost shell has an effect on the ionization energy as well. This effect, where the full positive charge of the nucleus is not felt by outer electrons due to the negative charges of inner electrons partially canceling out the positive charge, is called shielding. The more electrons shielding the outer electron shell from the nucleus, the less energy required to expel an electron from said atom. The higher the shieldingeffect the lower the ionization energy. It is because of the shielding effect that the ionization energy decreases from top to bottom within a group. From this trend, Cesium is said to have the lowest ionization energy and Fluorine is said to have the highest ionization energy.

4.4 Electron affinity:

Electron affinity is defined as the amount of energy released on the addition of electron in neutral atom to form an anion. The electron affinity is the potential energy change of the atom when an electron is added to a neutral gaseous atom to form a negative ion. So the more negative the electron affinity the more favorable the electron addition process is. Not all elements forms stable negative ions in which case the electron affinity is zero or even positive.

Electron affinity increases going left to right across a period. The overall trend across a period occurs because of increased nuclear attraction.

Going down the group the electron affinity should decrease since the electron is being added increasingly further away from the atom. Less tightly bound and therefore closer in energy to a free electron.

Electron affinity=1/Atomic Size

1.  Atomic size: If the atomic size is small, then there will be greater electron gain enthalpy because the effective nuclear forces will be greater in the smaller atoms and the electrons will be held firmly.

2.  Nuclear charge: The greater the nuclear charge more will be the value for electron gain enthalpy because an increase in nuclear charge will increase the effective nuclear force on valence electrons.

4.5 Electronegativity:

It basically indicates the net result of the tendencies of atoms in different elements to attract the bond-forming electron pairs. Electro negativitycan be measured on several scales. The most commonly used scale was designed by Linus Pauling. According to this scale, fluorine is the most electronegative element with a value of 4.0 and cesium is the least electronegative element with a value of 0.7.

Periodic Trends of electro negativity:On moving across a period from left to right the nuclear charge increases and the atomic size decreases, therefore the value of electro negativity increases across a period in the modern periodic table.

There is an increase in the atomic number as we move down the group in the modern periodic table. The nuclear charge also increases but the effect of the increase in nuclear charge is overcome by the addition of one shell. Hence, the value of electronegativity decreases as we move down the group. It is a general observation that metals show a lower value of electronegativity as compared to the non-metals.

4.6 Effective nuclear charge:

The effective nuclear charge is the net charge an electron experiences in an atom with multiple electrons. The effective nuclear charge may be approximated by the equation:

Zeff = Z – S

Where Z is the atomic number and S is the number of shielding electrons.
Higher energy electrons can have other lower energy electrons between the electron and the nucleus, effectively lowering the positive charge experienced by the high energy electron.

The shielding effect is the name given to the balance between the attraction between valence electrons and protons and the repulsion between valence and inner electrons. The shielding effect explains the trend in atomic size on the periodic table and also why valence electrons are readily removed from an atom.

4.7 Penetration of orbital’s:

Penetration describes the proximity to which an electron can approach to the nucleus. In a multi-electron system, electron penetration is defined by an electron's relative electron density near the nucleus of an atom. Electrons in different orbitals have different wave functions and therefore different radial distributions and probabilities. In other words, penetration depends on the shell and subshell. For example, we see that since a 2s electron has more electron density near the nucleus than a 2p electron, it is penetrating the nucleus of the atom more than the 2p electron. The penetration power of an electron, in a multi-electron atom, is dependent on the values of both the shell and subshell.

Within the same shell value, the penetrating power of an electron follows this trend in subshells:

s>p>d>f

And for different values of shell and subshell, penetrating power of an electron follows this trend:

1s>2s>2p>3s>3p>4s>3d>4p>5s>4d>5p>6s>4f

And the energy of an electron for each shell and subshell goes as follows...

1s<2s<2p<3s<3p<4s<3d<4p

The electron probability density for s-orbitals is highest in the center of the orbital, or at the nucleus. If we imagine a dartboard that represents the circular shape of the s-orbital and if the darts landed in correlation to the probability to where and electron would be found, the greatest dart density would be at the 50 points region but most of the darts would be at the 30 point region. When considering the 1s-orbital, the spherical shell of 53 pm is represented by the 30 point ring.

Electrons which experience greater penetration experience stronger attraction to the nucleus, less shielding, and therefore experience a larger EffectiveNuclearCharge, but shield other electrons more effectively.

4.8 Variations of s, p, d and f orbital energies of atoms:

The Energy of the s, p , d and f orbital are related as,s < p  < d < f   (It is only true for a given value of the principal Quantum number).This Means Energy Increases in each and every orbital.s orbital have the lowest energy and the highest Penetration effect. But as we know, Energy continuously increases in each Block as we move downwards in group or left to right across the period.As the Energy of orbital has been determined by the n + l rule which is the basis of the Aufbau Principle.Aufbau Principle is the basic Principle based on the n + l rule which is used for filling the electrons from lower energy level to the higher Energy levels.

The Aufbau is the Greek word which means climb up. This Rule tells us that electrons climbs up from lower energy level to higher energy level.

This Principle has much significance, as it has made the method of arranging the electrons easy. The Electronic configuration which may be defined as the arrangement of the electrons in an atom is systematically told by the Aufbau Principle. The increasing orders of atomic orbital in which electrons will be filed are,

1s,2s,2p,3s,3p,4s,3d,4p,5s,4d,5p,6s,4f,5d,6p,7s,5f,6d,7p.

The Chart for determining the lower energy level and higher energy level and the way in which electrons will be filled is shown in attachment.

4.9 Polarizability:

Polarizability is a measurement of a tendency of electron cloud is distortion by an electric field. Typically the electron cloud will belong to an atom or molecule or ion. The electric field could be caused, E.g. By an electrode or a nearby cation or anion.

If an electron cloud is easy to distort, we say that the species it belongs to is polarizable.

Polarizability, which is represented by the Greek letter alpha, α, is experimentally measured as the ratio of induced dipole moment p to the electric field E that induces it:

α = p/E

The units of α are C m2 V-1.

4.10 Oxidation states:

Some elements in the periodic table have only one oxidation number or two oxidation numbers. But some have lot of oxidation numbers. Oxidation number of element in a compound can be positive or negative or may be zero.

In sodium compounds, sodium only forms +1 oxidation number.

But some types of atoms such as chlorine form various oxidation numbers like -1, 0, +1, +3, +5, +7 oxidation numbers in compounds.

Rules for the determination of Oxidation States:

• The oxidation state of an uncombined element is zero. This applies regardless of the structure of the element: Xe, Cl2, and large structures of carbon or silicon each have an oxidation state of zero.
• The sum of the oxidation states of all the atoms or ions in a neutral compound is zero.
• The sum of the oxidation states of all the atoms in an ion is equal to the charge on the ion.
• The more electronegative element in a substance is assigned a negative oxidation state. The less electronegative element is assigned a positive oxidation state. Remember that electronegativity is greatest at the top-right of the periodic table and decreases toward the bottom-left.

4.11 Coordination numbers and geometries:

The Coordination number of an atom in a molecule or a crystal refers to the total number of atoms, ion, or molecules bonded to the atom in question. ‘Ligancy’ is another term used to refer to the coordination number of an atom.

The atoms, ions, molecules that are bonded to the central atom are called ligands. The ligancy of molecules is calculated differently when compared to calculating the coordination number of a central atom in a crystal.

There exist multiple possible geometric combinations for each value of the coordination number for the central atom. These possible geometric shapes are tabulated below.

4.12 Hard, soft acids and bases (Classification, Pearsons HSAB principle, its applications & limitations):

Principle of Pearson’s concept:

Pearson suggested a simple rule for predicting the stability of complexes formed between hard and soft acids and bases. “Hard acids prefer to bind (co-ordinate) with hard bases and soft acids prefer to bind with soft bases and gives stable complex compound”. It should be noted that the statement given above is not a theory or an explanation but it is simple rule of thumb which enables us to predict the relative stabilities of acid-bases adducts qualitatively.

Hard Acids and Bases

Hard acids consist of small highly charged cations and molecules in which a high positive charge can be induced on the central atom.

Examples of Hard Acids: H+, Li+, K+, Ca2+, Al3+, Sn4+, BF3, BCl3, CO2, RCO+, SO3, RMgX, VO2+, AlCl3

Hard bases are highly electronegative and of low polarizability.

Examples of Hard Bases: F-, OH-, NH3, N2H4, ROH, H2O, SO42-, PO43-

Hard bases react more readily to form stable compounds and complexes with hard acids.

Soft Acids and Bases

Soft acids consist of large low charge cations and molecules with relatively high energy occupied molecular orbitals. Soft acids are readily polarizable.

Examples of Soft Acids: Cs+, Cu+, Au+, Pt2+, Hg+, BH3, Br2, I2, RO+, quinones

Hard bases have low electronegative and low polarizability.

Examples of Soft Bases: H-, R-, CO, PR3, C6H6, SCN-

Soft bases react more readily and form stable compounds and complexes with soft acids.

Characteristics of HSAB:

Hard acid soft acid:

Hard base soft base:

4.13 Molecular Geometry (Valence shell electronpairrepulsiontheorytoNH3, H3O+, SF4, CIF3, ICl2 and H2O):

NH3:

Total valence electron = 5 + 3*1

= 8

=8/2

= 4

So,

The Hybridization = SP3

Bond pair =3

So,

Lone pair = 4–3 = 1

So,

Shape is pyramidal

H3O+:

H3O + is pyramidal in shape.

In H3O+, the central atom (oxygen) has three bond pairs and one lone pair and hence, it is sp3 hybridized.

You must know that ideal geometry for a sp3 hybridized central atom molecule is Tetrahedral. So the molecule should have Tetrahedral geometry in ideal condition ( a condition of all electron pairs on central atom being bond pairs only ).

But this is not an ideal case. Here, three electron pairs are bond pairs while one electron pair is lone pair creating distortion in molecule leading to a pyramidal shape of H3O+.

SF4:

With the context of VSEPR theory, electrons of the molecule can be counted to determine the electron geometry

Sulfur:  6 valence electrons
Fluorine:  7x4 valence electrons
Total:   34 valence electrons

The sulfur can be kept in the middle because fluorine tends to make single bonds. Therefore, we can keep 6x4 on each fluorine, 2x4 to account for four single bonds, and 2 for the last 2 valence electrons available.

As a result, we have 5 electron groups, so the electron geometry would be trigonal bipyramidal. With one lone pair of valence electrons, we get a seesaw molecular geometry.

CIF3:

Chlorine trifluoride has 5 regions of electron density around the central chlorine atom (3 bonds and 2 lone pairs). These are arranged in a trigonal bipyramidal shape with a 175° F(axial)-Cl-F(axial) bond angle.

The two lone pairs take equatorial positions because they demand more space than the bonds. The result is a T-shaped molecule.

H2O:

On the basis of VESPR theory water shows the bent structure. It can be explained as follows:

In H2O molecule, there is two valence electron one for each hydrogen and 6 valence electron of oxygen so total valence electron is 8. When we divide 8 by 2 we get 4 so hybridization is SP3 but there is only two bond which oxygen formed with two hydrogen so there is two lone pair and two bonds are formed and according to VESPR theory the geometry proposed is bent shape or inverted shape .

Total valence electron = 6 + 2*1

= 8

=8/2

= 4

So,

The Hybridization = SP3

So,

Shape is bent shape or inverted shape

4.14 Numerical based on effective nuclear charge:

Step 1: Find Atomic Number to Determine Z Value

Step 2: Write the Electron Configuration

Step 3: Attribute a Shielding Value to Each Electron

Step 4: Sum the S Values

Step 5: Find Z Effective Using Formula

Zeff *=* Z − S

Q- Which of the element have the radius of K and Cs.

Cs: For comparison of atoms, the trend in atomic radius is increasing radii from top to bottom and right to left on the periodic table. ↓←

Q- Using shielding and effective nuclear charge, explain the following.

a. The atomic radius of Cl is smaller than that of P.

b. Fe and Ni have similar atomic radii?

For both parts, look at the electron configuration and do a rough estimate of the effective nuclear charge:

Zeff = Z – σ.

Where σ is “shielding” from the inner shell electrons.

1. Cl: [Ne]3s2 3p5 Zeff = 17-10=7 (There are 10 electrons in the inner, neon, core.)

P: [Ne]3s2 3p3 Zeff = 15-10=5 The valence shell electrons in chlorine feel a pull of a +7 from the nucleus. The valence shell electrons in phosphorus feel a pull of a +5 from the nucleus. The stronger the attractive force from the larger effective nuclear charge, the smaller the atom. Across a period (in the representative elements), the nuclear charge increases as the shielding remains constant. Therefore Cl is smaller than P – the trend is that the atoms will decrease in size from left to right across the periodic table for this reason.

b. Fe: [Ar]4s2 3d6 The electrons in the 4s subshell are the farthest away from the nucleus. Shielding will occur from the electrons in the Ar inner core as well as the six electrons in the 3d subshell. For Fe, Zeff = 26 – (18+6) = 2 Ni: [Ar]4s2 3d8 Zeff = 28 – (18+8) = 2 The effective nuclear charge is the roughly the same for both atoms. Therefore the size trend flattens out across the transition metals.