Back to Study material
SME

UNIT-3

 VEHICLES AND THEIR SPECIFICATIONS


Automobile is a vehicle driven by an internal combustion engine and it is used for transportation of passengers and goods on the ground. Automobile can also be defined asvehicle which can move by itself.

Automobile Classification

  1. Based on Number of Wheels
  1. Two Wheelers: Motorcycle, Scooters 
  2. Three Wheelers: Auto-Rikshaw, Tempo
  3. Four Wheelers: Car, Truck, Bus

2.     Based on Use of automobiles

  1. Mopeds: Vehicle with pedals having engine 50cc and speed less than 50Km/hr.
  2. Motorcycle:Vehicle with gears having engine 50cc and speed more than 50Km/hr.
  3. Car: Vehicle with passenger capacity 1 to 8 seats.
  4. Bus:Vehicle with passenger capacity  more than 10 seats.
  5. Truck: Vehicle for Transporting Goods.

3.     Based on Purpose

  1. Passanger Vehicles: Cars, Buses
  2. Goods Vehicles: Tempo, Trucks

4.     Based on Capacity

  1. Light Motor Vehicles: Cars, Buses
  2. Heavy Motor Vehicles: Buses, trucks

5.     Based on Fuel

  1. Petrol Vehicles: Motorcycle, Car
  2. Diesel Vehicles: Bus, Truck
  3. Electric Vehicles: Electric Car
  4. Hybrid Vehicles: Hybrid Car

6.     Based on Transmission

  1. Manual Transmission: Manual Gear Shifting
  2. Automatic Transmission: AutomaticGear Shifting

7.     Based on Side Drive

  1. Left Hand Drive: American Vehicles
  2. Right Hand Drive: Indian Vehicles


COMPONENTS OF I.C. ENGINE

F:\G N Wakchaure\Official data\ZCOER\19-20\SME\6 Notes & Experiment Write up\SME Notes\SME Scan Unit 3\New Doc 2019-12-06 13.25.19_1.jpg

 

  1. Cylinder:

Combustion of fuel takes place inside of cylinder. Cylinder must with pressure of 70bar and temperature of 2500°C.

2.     Cylinder Head:

Cylinder head is to cover the top end of cylinder. It also provides space for valve mechanism and spark plug.

3.     Piston:

Piston transmits gas force to crank through the connecting rod. It reciprocates inside of cylinder.

4.     Piston Rings:

Prevents the leakage of gas to crank case. Upper ring is called Compression Rings and lower rings are called as Oil rings.

5.     Connecting Rod:

One end of connecting rod is connected to piston with piston pin and other end is connected to crank through crank pin. It converts reciprocating motion of piston into rotary motion of crankshaft.

6.     Gudgeon Pin (Piston Pin):

Connects piston and small end of connecting rod.

7.     Crank and Crankshaft:

Crank is integral part of crankshaft. Crankshaft is supported in main bearings.

8.     Crank Pin:Connects connecting rod to crank.

9.     Crankcase:

Crankshaft and main bearings are placed in crankcase. Bottom of engine is closed by means of oil sump, which carries lubricating oil.

10. Flywheel:

It is heavy rotary mass attached to crankshaft. Function is to control the cyclic fluctuations of torque of engine.

11. Inlet Valve:Controls entry of charge in cylinder.

12. Exhaust Valve:Discharges exhaust gases from cylinder.

13. Spark Plug:Provides spark for combustion of fuel in S.I. Engine.

14. Fuel Injector:Injects the fuel to cylinder with high pressure in C.I. engine.

15. Cooling Fin:Increases heat transfer rate for cooling of cylinder.

16. Main Bearing:Supports crankshaft.


Any vehicle specification is based on the following parameters.

  1. Engine Specification
  1. Fuel Type
  2. Engine Type
  3. Bore dia.  x Stroke length
  4. Displacement Volume (CC)
  5. Swept Volume (Vs)
  6. Clearance Volume (Vc)
  7. Maximum Power (BHP @ rpm)
  8. Maximum Power (N-m @ rpm)
  9. Number of Cylinders
  10. Valves per Cylinder
  11. Fuel Supply System
  12. Compression Ratio

2.     Fuel Consumption

  1. Fuel Tank Capacity
  2. Mileage
  1. Transmission
    1. Clutch
    2. Gear
  2. Brakes Specification
    1. Front brake
    2. Rear Brake
  3. Suspension Specification
    1. Front Suspension
    2. Rear Suspension

6.     Wheel Specification - Type of wheel – spoke or alloy

7.     Tyre Specification

  1. Aspect ratio
  2. Load Index
  1. Steering (in case of four wheelers)
  2. Battery Specification
    1. Voltage
    2. Ampere-Hour Rating
  3. Body Dimensions
  1. Kerb Weight
  2. Gross weight
  3. Wheel Base
  4. Ground Clearance
  5. Total length of vehicle
  6. Maximum width of vehicle
  7. Maximum  height of vehicle
  8. Boot Space(in case of four wheelers)
  9. Track – Front and Rear(in case of four wheelers)
  10. Overhang(in case of four wheelers)

 

 

  1. Engine Specifications
  1. Fuel Type

Type of fuel used may be petrol, CNG, LPG or diesel.

2.       Engine Type

It informs whether the engine is Four stroke or Two stroke engine& whether the engine is Air cooled or water cooled engine.

3.       Bore x Stroke

Inside diameter of cylinder is called as Bore while Distance travelled by piston when it moves from TDC to BDC is called as Stroke.

4.       Displacement Volume (CC)

Total volume of air –fuel admitted by cylinder during suction stroke is called as displacement volume. It is also the total cylinder volume of engine measured in cubic centimeter.

5.       Swept Volume (Vs)

Volume swept by piston when it moves from one end (TDC) to other end (BDC) is called as Swept Volume.

6.       Clearance Volume (Vc)

Volume between piston reaches TDC, at that position, the volume between piston top surface and cylinder head is called as Clearance Volume.

7.       Maximum Power (BHP @ rpm)

As the Engine speed increases power output of engine increases. It becomes maximum at some engine Speed and it reduces as engine speed further increases.Thus, it is the maximum power that the engine can develop at some value of engine RPM.

8.       Maximum Power (N-m @ rpm)

Engine speed increases the output torque of engine increases. It becomes maximum at some engine speed and it reduces as engine speed further increases. Thus, it is the maximum torque that the engine can develop at some value of engine RPM.

9.       Number of Cylinders

It specifies whether the engine is having only one cylinder or Number of cylinders used in engine. i.e. single cylinder engine or multi cylinder engine.

10.   Valves per Cylinder

It specifies Number of valves used in each cylinder of the engine.

11.   Fuel Supply System

Fuel supply system such as MPFI- Multi Point Fuel Injection can be used in four-wheeler petrol vehicle. CRDI- Common Rail Diesel Injection is also the fuel supply system that is generally used by four-wheeler diesel vehicle. Most of the two-wheeler uses carburetor device to supply petrol to the engine.

12.   Compression Ratio

It is the ratio of total volume of cylinder to clearance volume.

B.    Fuel Consumption:

  1. Fuel Tank Capacity (liters)

It is the total volume fuel in liters that can be filled in fuel tank of any vehicle.

2.       Mileage (kmpl)

It is measured in Kilometers per liter of fuel consumed under ideal conditions. It is nothing but the distance covered by any vehicle by consuming 01 liter of fuel.

C.   Transmission:

  1. Clutch:

Type of clutch used in the vehicle may be multiplate wet Clutch in case of two wheelers and Single plate dry clutch in case of four wheelers.

2.       Numberof Gears

No. of gears may vary according to type of vehicle i.e 3,4,5 etc.

 

D.   Braking

Types of brakes used in the vehicle may be disk brake or drum brake.

Front: Drum or Disk brake

Rear: Drum or Disk brake

E.    Suspension

Front:Telescopic hydraulic shock absorbers or spring loaded hydraulic damper. (2 -Wheeler)

Rear:Telescopic hydraulic shock absorbers or spring loaded hydraulic damper. (2 -Wheeler)

Four Wheeler:Mac Pherson Strut type shock absorber with coil spring OR Coupled Torsion Beam Axle with Coil Spring

F.    Wheels

Wheel Type used specifies the type of rim used to mount the tyres. It may be Spoke wheels or alloy wheels.

G.  Tyre Specifications:

  1. Aspect ratio:

Itis defined as the ratio of height of tyre section to width of tyre section.

2.       Load Index

It indicates maximum load carrying capacity of tyre when driven at maximum speed.Load index of 84 shows that maximum load carrying capacity of tyre is 500kg when driven at maximum speed.

H.   Steering:

Type of Steering used: Hydraulic or Electric Power Steering.

I.      Battery

  1. Voltage: 12V or 18V or 24V
  2. Ampere-Hour Rating: 2.5Ah or 5Ah or 7.5Ah

J.      Body Dimension

  1. Kerb Weight

It is weight of vehicle with all parts and all necessary operating consumables without passengers and cargo.

2.       Gross Weight

It is weight of vehicle with all parts and all necessary operating consumables with passengers and cargo.

3.       Wheel Base

It is the distance between centers of front and rear wheels of vehicle.

4.       Ground Clearance

It is the distance between the ground surface and lowest part of the vehicle.

5.       Total length of vehicle

6.       Maximum width of vehicle

7.       Maximum  height of vehicle

8.       BootSpace (in case of four wheelers)

It is the volume space available in car to keep the luggage.

9.       TRACK (in case of four wheelers)

FrontTrack: Distance between the centerline of front wheels.

RearTrack: Distance between the centerline of rear wheels.

10.   Overhangs (in case of four wheelers)

It is the lengths of a road vehicle which extend beyond the wheelbase at the front and rear.Overhang are Front Overhang and Rear Overhang.

 

 

AUTOMOBILE ENGINE SPECIFICATION:- Maruti Suzuki Celerio

Parameter

Specification

Fuel Type

Petrol/CNG

Engine Type

Water Cooled, 4-Stroke, BS 4 Petrol Engine

Bore x Stroke

73mm x 89.4mm

Displacement (CC)

998

Maximum Power

Petrol Mode: 50 kW @6000 rpm

CNG Mode: 43.5 kW @6000 rpm

Maximum Power

Petrol Mode: 90 N-m @3500 rpm

CNG Mode: 78 N-m @3500 rpm

Number of Cylinders

3

Valves per Cylinder

4

Fuel Supply System

MPFI- Multi Point Fuel Injection

Compression Ratio

10.3:1

 


 

Sample specifications of Bajaj CT 110&Hero Extreme Sportare given below.

  1. AutomobileVehicle Specifications of BAJAJ CT 110

Parameter

Specification

1. Engine

Engine Fuel Type

Petrol

Engine Type

Single cylinder, Air Cooled, 4-Stroke, Petrol Engine.

Bore x Stroke

50 mm x 58.8mm

Displacement (CC)

115

Maximum Power

6.3 kW (8.6 PS) @ 7000 rpm

Maximum Power

9.81 N-m @ 5000 rpm

Number of Cylinders

1

Valves per Cylinder

2

Fuel Delivery

Carburetor

Compression Ratio

10 : 1

2. Fuel Consumption

Fuel Tank Capacity

10.5 L

Reserve Fuel Capacity

2 L

Mileage

91 kmpl

3. Transmission

Number of Gears

4 , Manual Constant Mesh Gear Box

Clutch

Wet , MultiPlate

4. Braking

Front

130 mm Drum

Rear

110 mm Drum

5. Suspension

Front

Telescopic hydraulic shock absorbers 125 mm

Rear

SNS - Spring in Spring, 100 mm

6. Wheels

Wheel Size

18 inch

Wheel Type

Alloy Wheels

7. Tyres

Front Tyre

2.75 X 17 P, Semi-knobby tread pattern

Rear Tyre

3.00 X 17 P, Semi-knobby tread pattern

8. Battery

Voltage

12V

Ampere hour Rating

3 Ah

9. Dimension and Weight

Kerb Weight

116 Kg

Wheel Base

1235 mm

Ground Clearance

170 mm

Length

1945 mm

Width

752 mm

Height

1072 mm

 

2.     Automobile Vehicle Specifications of HERO EXTREME SPORT

Parameter

Specification

1. Engine

Engine Fuel Type

Petrol

Engine Type

Air Cooled, 4 - Stroke Single Cylinder OHC

Bore x Stroke

57.3 mm x 57.8 mm

Displacement (CC)

149.2

Maximum Power

11.64 KW (15.6 BHP) @ 8500 rpm

Maximum Power

13.50 N-m @ 7000 rpm

Number of Cylinders

1

Valves per Cylinder

2

Fuel Delivery

CV Type with Carburetor Controlled Variable Ignition

Compression Ratio

10 : 1

2. Fuel Consumption

Fuel Tank Capacity

12.1 L

Reserve Fuel Capacity

1.5 L

Mileage

65 kmpl

3. Transmission

Number of Gears

5 , Manual Constant Mesh Gear box

Clutch

Wet , MultiPlate

4. Braking

Front

240 mm Disc

Rear

110 mm Drum

5. Suspension

Front

Telescopic hydraulic shock absorber

Rear

Rectangular Swing Arm with 5 step Adjustable Gas Reservoir Suspension

6. Wheels

Wheel Size

18 inch

Wheel Type

Alloy Wheels

7. Tyres

Front Tyre

80 / 100 x 18 - 47 P Tubeless

Rear Tyre

110 / 90 x 18 - 61 P Tubeless

8. Battery

Voltage

12V

Ampere hour Rating

4 Ah

9. Dimension and Weight

Kerb Weight

147 Kg

Wheel Base

1325 mm

Ground Clearance

163 mm

Length

2100 mm

Width

780 mm

Height

1080 mm

 

 


Sample specifications of & are given below.

  1. Automobile Vehicle Specifications of HUNDAI CRETA 1.6 SX Option Diesel

Parameter

Specification

1. Engine

Engine Fuel Type

Diesel

Engine Type

Water Cooled, 4 - Stroke

Bore x Stroke

73 mm X 71.5 mm

Displacement (CC)

1582

Maximum Power

128 bHp @ 4,000 rpm

Maximum Power

259.87 N-m @ 1500-3000 rpm

Number of Cylinders

4

Valves per Cylinder

4

Fuel Delivery

CRDi with VGT

Compression Ratio

15 : 1

2. Fuel Consumption

Fuel Tank Capacity

55 L

Reserve Fuel Capacity

-

Mileage

20.5 kmpl

3. Transmission

Number of Gears

6-Speed Automatic

Clutch

Dry, Single plate

4. Braking

Front

Disc

Rear

Drum

5. Suspension

Front

McPherson Strut with Coil Spring

Rear

Couple Torsion Beam Axle with Coil Spring

6. Wheels

Wheel Size

17 inch

Wheel Type

Alloy Wheels

7. Tyres

Front Tyre

215/60 R17 Steel Tubeless

Rear Tyre

215/60 R17 Steel Tubeless

8. Steering

Power Steering

Yes

Steering Type

Adjustable

9. Battery

Voltage

18 V

Ampere hour Rating

7 Ah

10. Dimension and Weight

Kerb Weight

1398 Kg

Wheel Base

2590 mm

Ground Clearance

190 mm

Length

4270 mm

Width

1780 mm

Height

1665 mm

Boot Space

400 L

Gross Weight

1455 kg

Front Track

1490 mm

Rear Track

1480 mm

Minimum Turning Radius

5.3 m

Seating Capacity

5

Front Overhang

150 mm

Front Overhang

120 mm

 

2.     Automobile Vehicle Specifications of MARUTI SUZUKI SWIFT LXI

Parameter

Specification

1. Engine

Engine Fuel Type

Petrol

Engine Type

Water Cooled, 4 - Stroke

Bore x Stroke

73 mm X 71.5 mm

Displacement (CC)

1197

Maximum Power

81.8 bHp @ 6000 rpm

Maximum Power

113 N-m @ 4200 rpm

Number of Cylinders

4

Valves per Cylinder

4

Fuel Delivery

MPFI

Compression Ratio

11 : 1

2. Fuel Consumption

Fuel Tank Capacity

37 L

Reserve Fuel Capacity

 

Mileage

22 kmpl

3. Transmission

Number of Gears

5-Speed Manual

Clutch

Dry Single Plate

4. Braking

Front

Disc

Rear

Drum

5. Suspension

Front

McPherson Strut with Coil Spring

Rear

Couple Torsion Beam Axle with Coil Spring

6. Wheels

Wheel Size

14 inch

Wheel Type

Alloy Wheels

7. Tyres

Front Tyre

165/80 R14 Tubeless

Rear Tyre

165/80 R14 Tubeless

8. Steering

Power Steering

Yes

Steering Type

Adjustable Electric

9. Battery

Voltage

18V

Ampere hour Rating

7 Ah

10. Dimension and Weight

Kerb Weight

880 Kg

Wheel Base

2450 mm

Ground Clearance

163 mm

Length

3840 mm

Width

1735 mm

Height

1530 mm

Boot Space

268 L

Gross Weight

1315 kg

Front Track

1530 mm

Rear Track

1530 mm

Minimum Turning Radius

4.8 m

Seating Capacity

5

Front Overhang

150 mm

Front Overhang

120 mm

 


  1. Automobile Vehicle Specifications of VOLVO 9400 14.5 M

Parameter

Specification

1.Engine

Fuel Type

Diesel

Engine Type

Water Cooled, 4-Stroke, Diesel Engine.

Bore x Stroke

73mm x 89.4mm

Displacement (CC)

10.8L

Maximum Power

410 BHP @ 2000 rpm

Maximum Power

1980 N-m @ 2000 rpm

Number of Cylinders

6

Valves per Cylinder

2

Fuel Delivery

CRDI

2. Fuel Consumption

Fuel Tank Capacity

600 L

3.Transmission

Number of Gears

12 Speed Automatic

Clutch

Dry Single plate

4. Braking

Front

Disk Brake with Electronic braking System

Rear

Disk Brake with Electronic braking System

5. Suspension

Front

Electronically Controlled Air Suspension (ECS)

Rear

Electronically Controlled Air Suspension (ECS)

6. Wheels

Wheel Size

18 inch

Wheel Type

Alloy Wheels

7. Tyres

Front Tyre

295/80 R 22.5Tubeless

Rear Tyre

295/80 R 22.5Tubeless

8. Steering

Power Steering

Yes

Steering Type

Adjustable Electric

8. Dimension and Weight

Kerb Weight

-

Wheel Base

8350 mm

Ground Clearance

209 mm

Gross Weight

22200 kg

Front Track

2054 mm

Rear Track

1837 mm

Minimum Turning Radius

11.54 m

Seating Capacity

54

Length

14500 mm

Width

2600 mm

Height

3600 mm

Front Overhang

2620 mm

Rear Overhang

2830 mm

 

 

 


1. Engine

  • Fuel type: The diesel engines have higher thermal efficiency compared to petrol engines. Therefore, diesel vehicles give better fuel economy compared to petrol vehicles.
  • In addition, price of diesel is less compared to petrol. Hence, customers with heavy usage of vehicle, prefer diesel vehicles.
  • However, diesel vehicles have higher initial as well as maintenance cost compared to petrol vehicles.
  • So, if initial cost is a prime consideration, petrol vehicles are preferred; whereas if running cost is a prime consideration diesel vehicles are preferred.
  • Displacement, maximum power and maximum torque: All three parameter indicate the power of an engine.

2. Fuel Efficiency and Performance:

  • Mileage (kmpl): Higher the mileage, lower is the running cost of the vehicle.
  • Top Speed and Acceleration: User prefer vehicles with higher top speed and higher acceleration or pick up.

3. Transmission System:

  • Type of transmission: Now a days, type of transmission is one of the most important comparison parameter. Because of ease and comfort of driving, many user prefer vehicles with automatic transmission over Vehicles with manual transmission.
  • Number of gears:Vehicles with more number of gears give more number of speed ranges.

4. Braking System:

  • Disc brakes give better braking effect compared to drum brakes. Therefore Vehicles with disc brakes are preferred over vehicles with drum brakes.

5. Suspension System:Better type of suspension system gives comfort to Passengers.

6. Steering:

  • Power Steering:The vehicles reduce the efforts required for steering the vehicle.
  • Steering Adjustments:now  days, in many high end cars, steering is provided with telescopic and tilt adjustments. The vehicles with such adjustments enhance the driving comfort.

7. Dimensions:

  • GroundClearance:The vehicles with high ground clearance reduce the possibility of underbody striking, the road while driving on rough roads or off roads.
  • However, higher ground clearance means higher center of gravity which reduces the stability of vehicle.
  • Boot Space: Higher boot space means higher space for the storage of luggage.
  • SeatingCapacity:The seating capacity is one of the most important comparison parameters while selecting the vehicle.

8. Cost, Safety and Comfort Parameters are also considered for Comparison of Vehicles.

  • These includes
    • on road price
    • Aesthetics
    • Maintenance cost
    • Warranty
    • driver and passenger safety devices
    • interior of vehicle Infotainment system.

 


Need of Electrical Vehicles:

  • With current rate of oil production and consumption, the oil reserves on the earth will not last for more than 50 years.
  • The automobile manufactures all over the world are looking for alternative energy sources for vehicles because of following reasons
    • Fast depletion of crude oil reserves
    • Increasing crude oil prices
    • High pollution due to vehicles 
    • Increasing cost of vehicles due to new pollution control norms.

Types of Electric Vehicles

  • Battery Electric Vehicles (BEVs)
  • Hybrid Electric Vehicles (HEVs)

 


 

F:\G N Wakchaure\Official data\ZCOER\19-20\SME\6 Notes & Experiment Write up\SME Notes\SME Scan Unit 3\New Doc 2019-12-06 13.25.19_3.jpg

 

Figure: Battery Electric Vehicles (BEVs)

  • Battery electrical vehicles are an automobile propelled by one or more electric motors using the energy stored in rechargeable battery. It consist of following components.
  • Charger: The charger gets electricity supplied by electric grid and charges the battery of the vehicle.
  • Rechargeable Battery: The rechargeable battery is charged through the charger. The battery may be Lead-acid battery, Nickel-metal hydride battery or Lithium-ion battery.
  • The distance travelled by electric vehicle depends upon the energy storage capacity of the battery which ranges between 30 kWh to 150 kWh.
  • Drive Control Unit: The drive control unit controls the supply of electric current from battery to inverter.
  • Inverter: Inverter converts D.C. supply of battery to A.C. supply if AC Motor is used. If DC Motor is used in vehicle then inverter is not required.
  • Electric Motor: A.C. motor or D.C. motor drives the transmission unit. It convert electrical energy into mechanical energy in the form of rotations.
  • Transmission Unit (Gear box): The transmission unit drives the rear wheels.

 

 

Advantages of Battery Electric Vehicles

  • Pollution free.
  • Less Noise.
  • Simple in design.
  • Low running cost.
  • Low maintenance cost.

Disadvantages of Battery Electric Vehicles

  • Limited travelling range
  • High initial cost
  • Battery life is short
  • Low speed
  • Charging station non-availability.

 


  • Hybrid Electric Vehicle (HEV) or hybrid vehicle is an automobile propelled by two power sources: (i) Electric motor driven by rechargeable battery and (ii) I.C. engine.
  • Hybrid electric vehicle is a progressive transformation from conventional automobile vehicle powered by only I.C. engine to battery electric vehicle powered by only electric motor.
  • Hybrid electric vehicle minimizes the drawbacks of conventional I.C. engine powered automobile vehicle and retains the advantages of conventional I. C. engine powered automobile vehicle.
  • Types of Hybrid Electric Vehicles:
    • Series Hybrid Vehicles
    • Parallel Hybrid Vehicles

1. Series Hybrid Vehicles

F:\G N Wakchaure\Official data\ZCOER\19-20\SME\6 Notes & Experiment Write up\SME Notes\SME Scan Unit 3\New Doc 2019-12-06 13.25.19 - Page 6.jpg

 

Figure: Series Hybrid Vehicles

  • In series hybrid vehicles electric motor is the only means of providing the power to the wheels through transmission unit (gear box). The electric motor receives electric power form either from rechargeable battery or generator run by I.C. engine.
  • The computer assisted drive control unit decides the quantity of power to come from the battery and the IC engine generator.
  • The excess electric power from generator is used to charge the battery. In addition, during braking, the electric motor acts as a generator and uses the regenerative braking energy to charge the battery. The battery is charged through charger form electric grid. In series hybrid vehicle, engine is of smaller capacity; because it has to meetonly partial power requirement. The battery is more powerful.

2. Parallel Hybrid Vehicles

F:\G N Wakchaure\Official data\ZCOER\19-20\SME\6 Notes & Experiment Write up\SME Notes\SME Scan Unit 3\New Doc 2019-12-06 13.25.19_5.jpg

 

Figure: Parallel Hybrid Vehicles

  • In parallel hybrid vehicles, the I.C. engine as well as electric motor drives the wheels through the transmission unit.
  • When power demand is low, the electric motor acts as a generator and utilizes the excess power form I.C. engine to charge the battery.
  • In addition, during braking also, the electric motor acts as a generator and uses the regenerative braking energy to charge the battery.
  • In parallel hybrid vehicles, engine is of higher capacity as compared to series hybrid vehicles. However, parallel hybrid vehicles use a smaller capacity battery compared to series hybrid vehicles.

Advantages of Hybrid Electric Vehicles

  • Large travelling Range
  • Environment friendly.
  • Regenerative braking
  • Light weight

Disadvantagesof Hybrid Electric Vehicles

  • High initial cost
  • Battery life is short
  • Less Power
  • High maintenance cost

 

Specifications Electric Vehicle

Parameter

Specifications

1. Electric Motor

Type

Permanent Magnet Synchronous Motor

Maximum Power

134 hp (100 kW)

Maximum Torque

395 N-m

2. Battery

Type

Lithium-Ion Polymer, 327 V

Capacity

39.2 kWh

A.C. Charging 230 V (0-100 %)

Approx. 6 h 10

D.C. Charging (0-80%)

Approx. 57 min

Driving Range

452 km

 


The overall cost of vehicle includes many parameters. Some of them are as follows.

  1. Type of Engine: According to the type of engine or its capacity the cost of vehicle changes. For high power engines, the cost of vehicle is very high.
  2. Safety Features: If a vehicle includes safety features like air ABS, air bag etc. then the cost of vehicle increases. It also depends on the number of airbags in a vehicle.
  3. Material of vehicle (Raw material): The material of vehicle is one of the important factor in cost analysis. For high grade material the cost of vehicle increases rapidly. Now-a-days some parts of vehicle are replaced by fiber parts to reduce the cost of vehicle.
  4. Production Method: Some manufactures like BMW, Audi etc. use fully automatic machines for production of vehicle. This increases accuracy and finishing of vehicle. But this increases the cost of vehicle. Hence as per the production method the cost of vehicle changes.
  5. Research and development (R and D): It is a hidden cost of vehicle. It requires long time and number of technical people.
  6. Royalty: The innovations like ABS, Air bags, ESP etc. are all innovations by Bosch Company and not by car manufacturers. The manufacturers need to pay royalty to Bosch for using the technology.
  7. Dealer profit
  8. Insurance and taxation
  9. Availability of spare parts
  10. Advertisement (Posters, ads, campaigns etc.)
  11. Quantity of production
  12. Labour cost, etc.

A

Reference Books

 

1. Khan, B. H., “Non Conventional Energy Sources, Tata McGraw-Hill Publisher Co. Ltd.

2. Boyle, Godfrey, “Renewable Energy”,2nd Ed., Oxford University Press

3. Khurmi, R.S. ,and Gupta, J. K.,“A Textbook of Thermal Engineering”, S. Chand & Sons

4. Incropera, F. P. and Dewitt, D.P., (2007), “Fundamentals of Heat and Mass Transfer, 6th Ed., John Wiley and Sons, USA

5. Groover,Mikell P., (1996), “Fundamentals of Modern Manufacturing: Materials, Processes, and Systems”, Prentice Hall, USA

6. Norton, Robert L., (2009), “Kinematics and Dynamics of Machinery”, Tata McGrawHill

7. Cleghorn, W. L., (2005), “Mechanisms of Machines”, Oxford University Press

8. Juvinal, R. C., (1994), “Fundamentals of Machine Component Design”, John Wiley and Sons, USA

9. Ganeshan, V., (2018), “Internal Combustion Engines”, McGraw Hill

10. Anderson, Curtis Darrel and Anderson,Judy, (2010), “Electric and Hybrid Cars: A History”, 2nd Ed., McFarland

 

 


Index
Notes
Highlighted
Underlined
:
Browse by Topics
:
Notes
Highlighted
Underlined