Question Bank | unit 6 electrical installations

BEE

Question Bank

Unit-6

Q1) What are MCB’s?

Sol: MCB is a switch which automatically turns off when the current flowing through it passes the maximum allowable limit. Generally, MCB is designed to protect against over current and over temperature faults. In MCB there are two contacts one movable and other non-movable. When the current exceeds the predefined limit, a solenoid forces the moveable contact to open and the MCB turns off, thereby stopping the current from flowing in the circuits.

It mainly consists of one bi- metallic strip, one trip coil and one hand operated on-off lever. The current in MCB flows from left side of circuit to bimetallic strip further going into the current coil, moving contact and at last through right side of circuit. When circuit is overloaded the bimetallic strip is overheated.

This deformation of bimetallic strip causes displacement in the latch. This displacement releases the spring through which the MCB is connected to the moving contact. This spring makes moving contact to open MCB.

The current coil or trip coil placed in such a manner that during SC faults, the MMF of that coil causes its plunger to hit the same latch point and force the latch to be displaced. Hence, the MCB will open in the same manner.

Q2) List Advantages of MCB?

Sol:

i) MCBs are replacing the re-wireable switch i.e., fuse units for low power domestic and industrial applications.

Ii) The disadvantages of fuses, like low SC interrupting capacity (say 3kA), Etc. Are overcome with high SC breaking capacity of 10kA

Iii) MCB is combination of all three functions in a wiring system like switching, overload and short circuits protection. Overload protection can be obtained by using bi-metallic strips whereas shorts circuits protection can be obtained by using solenoid

Q3) Explain Voltage-ELCB?

Sol: It consists of a relay coil; one end of that coil is connected to the metal body and other to the ground. When voltage on the equipment body rises to 50V (danger level) the current in the relay loop moves the relay contact by disconnecting the supply current and saves from electric shock.

Q4) Explain Current ELCB?

Sol: It is mostly commonly used ELCB. It consists of transformer having two primary (neutral and line wire) windings and one secondary winding. In balanced condition there is no current in secondary because the neutral wire balances the current through the phase wire.

During fault a small current flow to ground causing imbalance between line and neutral currents. As a result of which current is induced in secondary winding. The sensing circuit connected to the secondary sends signal to the tripping system and the contact is tripped.

Q5) What are MCCB?

Sol: Moulded case circuits breakers are electromechanical devices which protect a circuit from over current and short circuits. They provide over current and short circuits protection for circuits ranging from 63A up to 3000 A. They are used for heavy duty applications as they have high current ratings. They provide electric feeder protection, capacitor bank protection, generator protection, welding applications, low current application that require adjustable trip setting and motor protection.

The are made up of heavy duty insulated plastic. MCCB has a bimetallic contact that expands and contacts when there is change in temperature. When current exceeds the adjustable trip value the contact gets heated and expands. The fault currents in MCCB can be interrupted immediately. Whenever a fault occurs, the extremely high current induces a magnetic field in a solenoid coil located inside the breaker – this magnetic induction trips a contact and current it interrupted

Q6) Explain types of wirings?

Sol: (i) According to the conductor material used

(a) Copper conductor cables

(b) Aluminium conductor cable

(ii) According to number of cores

(a) Singles core cable (SCC)

(b) Double core or twin core cables (DCC)

(d) four core cables

(e) Two cores with earth continuity conductor cables

(iii) According to type of insulation

(a) Vulcanized Indian rubber (VIR) insulated wires/cables

(b) Tough rubber sheathed (TRS) or cable tyre sheathed (CTS) cables

(b) Lead sheathed cables

(e) Weather proof cables

(f) Flexible cords and cables

(g) XLPE cables

(IV) According to the voltage at which they are manufactured

(a) Low tension (LT) cables – up to 1000V

(b) High tension (HT) cables – up to 11kV

(d) Extra high tension (EHT) cables – from 33-66kV

(e) Extra super voltage cables – beyond 132 kV

Q7) What is the need for earthing?

Sol:

i) To protect the operating personnel from the danger of shock.

Ii) To maintain the line voltage constant, under unbalanced load condition.

Iii) To avoid risk of fire due to earth leakage current through unwanted path.

Iv) Protection of the equipment.

v) Protection of large buildings and all machines fed from overhead lines.

Q8) Explain plate earthing?

(i) Sol: A copper plate of dimension 60cm x 60cm x 3.18 is used for earthing. The plate is buried in ground and layered with coal and salt. Then water is poured to maintain the earth’s electrode resistance below maximum value. The earth wire is bolted to the earth plate.

Q9) Explain Rod earthing?

(i) Sol: It is similar to pipe earthing method. A copper rod is buried upright in the earth manually or with pneumatic hammer. The length of embedded electrodes in soil reduces earth resistance to a desired level.

Q10) List applications of various types of earthing?

Sol:

Sign Up