Unit - 9

Microbiology

Q1) What are single celled organisms?

A1) An organism who lives a life which is independent. Single cell organisms are organisms that have a single cell, they perform the entire activities with the single cell itself.

Single Celled Organisms

Protozoa: These are the Eukaryotic cells most of them live in water, either in fresh water or marine water very few are found in the soil or land. They are a variety of protozoa and some are parasites and some are free living. Some of them are known to even cause severe diseases in humans.

Their Internal structure generally consists of a nucleus, plasma membrane, cilia, mitochondria, vesicles, and other cell organelles. Though they are free living they are dependent on other sources for their food. They eat up bacteria and other organic matter.

Examples include: Amoeba, euglena, paramecium.

Parasites include: Entamoeba, plasmodium

Bacteria: These are prokaryotic single celled organisms. They are found to be present almost everywhere. They are found in soil, water, air and even in extreme climate conditions like heat and cold. There are many bacteria that have been affecting humans, causing a number of diseases since centuries. These bacteria have ability to obtain energy from various sources. Some of them are parasites, some autotrophs, saprophytes, and even chemotrophs.

Examples include E-coli, staphylococcus bacteria, salmonella typhi, pseudomonas aeruginosa etc.

These organisms have different ways to gain energy. Some cells absorb energy through the surface of the cell directly into the cell body. If the cell is large, the cell literally wraps its body around a small cell or can be a nutrient, absorbs the nutrient or the cell into its body and digests the nutrient directly in order to gain energy. Other single cells can absorb energy directly from the sun through special structures called chloroplasts and use it to make chemical food energy.

Archaea: These are another set of prokaryotes which significantly differ from bacteria. They occur in harsh climates like salt water and hot springs. However, they are also found in soils and oceans.

Q2) How do single celled organisms reproduce?

A2) Single celled organisms reproduce asexually through Binary fission, in which the parent organism divides in two to produce two genetically identical daughter organisms. Eukaryotes (such as protists and unicellular fungi) may reproduce in a functionally similar manner by Mitosis; most of these are also capable of sexual reproduction.

Some cells divide by budding, resulting in a "mother" and a "daughter" cell that is initially smaller than the parent. Budding is also known on a multicellular level; an animal example is the hydra, which reproduces by budding. The buds grow into fully matured individuals which eventually break away from the parent organism.

Many multicellular organisms form sporesduring their biological life cycle in a process called sporogenesis. Exceptions are animals and some protists, which undergo meiosis immediately followed by fertilization. Plants and many algae on the other hand undergo sporic meiosis where meiosis leads to the formation of haploidspores rather than gametes. These spores grow into multicellular individuals (called gametophytes in the case of plants) without a fertilization event. These haploid individuals give rise to gametes through Mitosis. Meiosis and gamete formation therefore occur in separate generations or "phases" of the life cycle, referred to as Alternation of generations. 

Fragmentation is a form of asexual reproduction where a new organism grows from a fragment of the parent. Each fragment develops into a mature, fully grown individual. Fragmentation is seen in many organisms. Animals that reproduce asexually include planarians, many annelids worms including polychaetes. Many fungi and plants reproduce asexually.

Q3) Define Strains?

A3) Biology, a strain is a genetic variant, a subtype or a culture that exists within a biological species. Specific Genetic isolation are characterized by inherently artificial concept that Strains are often seen as in this aspect. This is most easily observed in microbiology in a petri dish where strains are derived from a single cell colony and are typically grown in isolation by the physical constraints of a petri dish. Strains are also commonly referred to within virology, botany, and with rodents used in experimental studies. By mutation or genetic swapping new viral strains can be created when two or more viruses infect the same cell. These phenomena are known respectively as antigenic drift and antigenic shift. Metagenomic methods are used to maximize resolution within species, this method is also used to differentiate Microbial strains by using their genetic makeup. This has become a valuable tool to analyse the microbiome. In biotechnology, microbial strains have been constructed to establish metabolic pathways suitable for treating a variety of applications. Production of biofuel has been going on, Historically, a major effort of metabolic research. Strains of E. Coli are extensively used for this application. Simple protein expression is obtained through E. Coli. These strains, such as BL21, are modified genetically to minimize protease activity, hence large-scale protein production which is efficient can be enabled. Are extensively used for Industrial fermentation are the most common subjects of eukaryotic genetic modification.

E. Coli is most common species for prokaryotic strain engineering. Scientists have succeeded in establishing viable minimal genomes from which new strains can be developed. These minimal strains provide a near guarantee that experiments on genes outside the minimal framework will not be affected by non-essential pathways.

Q4) Explain Species in Microbiology?

A4) "Species are groups of potentiallyinterbreeding natural populations which reproduce in isolation from other such groups."

This definition brings into view that the individuals of a single species are able to interbreed but stay isolated reproductively from each other.

Speciation cannot occur without reproductive isolation. In order to diverge from ancestral population, populations need to be divided for many generations of offspring and become new and independent species. However, if the population does not divide, itself either physically through some sort of barrier, or reproduce by their behaviour or follow other mechanisms like prezygotic or postzygotic isolation mechanisms, then the species will continue to be one species and will not divide itself into any other form and become its own distinct species. This isolation is central to the biological species concept.

Morphological Species

Morphology accounts for the individual looks an organism has. It is their physical features and anatomical parts. When Carlos Linnaeusfirst came up with his binomial nomenclature taxonomy, all individuals were grouped according to phenotype or morphology. Therefore, we must remember that the first concept of the term "species" was based on the morphology or phenotype. The morphological species concept does not take account into aspects like genetics and DNA. Linnaeus was unaware about chromosomes and their differences in evolution that actually make some individuals that look similar or a part of different species.

The morphological species concept definitely has its own limitations. First, it does not show any differences between species that are actually produced by different evolution and are not really related closely. It also does not group individuals of the same species that would happen to be somewhat morphologically different like in colour or size. It is much more accurate to use behaviour and molecular evidence to determine what is the same species and what is not.

Lineage Species

A lineage has a simple meaning of a branch on a family tree. The phylogenetic trees of that grow in many directions are actually groups of related species branch off where new lineages are created from speciation of a common ancestor. Subsequently some of them fail to exist over time while others become extinct others thrive and continue to live on. This lineage study of species becomes very important for scientists who are interested to study the history of life on earth and evolution.

On observing scientists can determine when the species diverged and evolved compared to their, factors like common ancestor the similarities and differences of different lineages are also taken into consideration. This idea of lineage species can also be used to study the asexually reproducing species. Species that reproduce asexually is not much considered. Since biological species concept is dependent upon reproductive isolation of sexually reproducing species. The lineage species concept does not have that restraint and therefore can be used to explain simpler species that do not need a partner to reproduce.

Q5) Classification of Microorganisms?

A5) Classification helps to describe the bacterial species based on diversity and grouping these organisms based on their similarities. Microorganisms can be classified on the basis of cell structure, cellular metabolism, or on differences in cell components such as fattyacids, DNA, fatty acids, antigens, antigens and quinones.

• Bacteria: They are known to aggregate into multicellular colonies and can reproduce individually and can function on their own however they lack membrane -bound organelles.  Bacteria have cell walls that give them strength and rigidity they also have their own genetic material is usually a single loop of DNA, although they can also harbour small pieces of DNA called plasmids. During bacterial conjugation these plasmids are transferred between cells.
• Archaea: In the past, no difference as such was known between bacteria and archaeatherefore, they both were classified as part of kingdom Monera. Archaea are also single-celled organisms that do not possess a nuclei. Archaea in fact differ from bacteria in both their genetically and biochemistry, the main difference of bacterial cell membranes is that they are made from phosphor glycerides with ester bonds, whileArchaean membranes are made of ether lipids
• Eukaryotes: Unlike bacteria and archaea, eukaryotes contain organelles such as the cell nucleus, Mitochondria and the Golgi apparatus, in their cells. Like bacteria, plant cells have cell organelles and cell walls and contain organelles such as chloroplasts in addition to the organelles in other eukaryotes.

The Gram stain, developed by Hans Christian Gram in 1884, characterizes bacteria based on the structural characteristics present in their cell walls. The thick layers of peptidoglycan in the “Gram-positive” cell wall stain purple, while some are stained pink due to their thin cell wall and are “Gram-negative”. Thus, when these two factors are combined, morphology and Gram-staining, most of the bacteria can be classified as belonging to one of four groups (Gram-positive cocci, Gram-negative cocci, Gram positive bacilli and Gram-negative bacilli). Acid-fastness on Ziehl–Neelsen or similar stains are some of the stains that some organisms are best identified, particularly mycobacteria or Nocardia. Other organisms may need to be identified by their growth in special media, or by other techniques, such as serology.

Q6) Define a Microscope and its types?

A6) The observation of an enlarged picture of a minute organism is possible through a microscope, an instrument which provides an enlarged image of an object not visible with the naked eye.

Aside from the common microscopy, there are a few special types of microscopy that include:

• Electron microscopy – These are microscopes that use an electron beam that replaces light to form an image.
• Fluorescence microscopy – The principle is based on the fact that fluorescent materials emit visible light when they are irradiated with ultraviolet (UV) rays.
• Immune electron microscopy – mainly used for biological specimens, in Electron microscopy specimens to which a specific antibody has been bound.
• Immunofluorescence microscopy – this Microscopy uses the concept of antibodies labelled with a fluorescing substance and a fluorescence microscope is used to detect the binding of the specific antibody by emitting a characteristic visible light under UV light.
• Nomarski microscopy – this is an unusual type of microscopy that requires a special optical system (Nomarski optics) to do "differential interference contrast microscopy."
• Time-lapse microscopy – a special type of Microscopy in which the same object is photographed at regular intervals with time to, for example, observation of a cell goes through division.

The word "microscopy" comes from Greek roots: mikros, small + skopeo, to view = to view small (objects).

Q7) What is Sterilization, mention its types?

A7) If an object or a surface needs to be cleared of all forms of organisms or germs then it has to undergo a process called, Sterilization it is the process of killing all forms organisms from the desired surface or object. In microbial terms it applies to killing microorganisms of all kinds like fungi, bacteria, yeast moulds and even viruses from desired surfaces.

Sterilization is a process of destruction of all forms of living microorganisms from a substance.

Articles that come in direct contact with humans and animals are subjected to sterilization.

These articles can include drugs, nutraceuticals, surgical equipment, food, etc.

Sterilization is mainly a process carried to preserve the substance for a longer period   of time and not allowing it to decay. Secondly, a substance that is not sterile may cause infections when consumed or administered as it may contain microbes.

So, sterilization is a very essential process. The microbes are invisible to naked eye, and some bacteria even have a protective sheath on their surface making them resistant to even sterilization.

For this effective sterilization techniques are designed and studied in microbiology.

The Methods of Sterilization include

1. Heat methods.

2. Chemical sterilization.

Heat method of sterilization: This is the most common method of sterilization. The heat is used kills the microbes present in the substance. The extent of sterilization is affected by factors like, the temperature of the heat and duration of heating.

In heat sterilization process, as the temperature of heat goes up the time span required for sterilization decreases, therefore for a given temperature the longer the exposure to heat the better is the sterilization. Further, the sterilization time increases with a decrease in temperature and vice-versa. The most important factor is to maintain minimum sterilization time or minimum contact time for the heat to be in touch with microbes or bacteria and thereby kill them.

Chemical sterilization is the elimination of all viable microorganisms and their spores using liquid or gaseous compounds, Chemical sterilisation (also spelled chemical sterilization) refers to a technique of sterilization making use of a chemical agent. Objects can be sterilised with products like formaldehyde

Q8) What is an Autoclave, how is it helpful?

A8) Here the substances are subjected to sterilization in an instrument called autoclave a steam sterilization equipment. The process is carried out at a temperature of 121degrees for 20 mins or 115 degrees for 60 min at 15psi pressure.

The saturated steam is formed at boiling temperature of water, at about100 degrees.

This steam produced in the Autoclave condenses on the material to be sterilised and relieves the latent heat repeatedly to convert back into the water.

Further, the saturated steam under pressure penetrates all the narrow spaces leaving no microbes alive thereby making the sterilization very efficient.

It is the most common method used for pharmaceutical drugs as it is powerful enough even to kill bacterial spores, bacterial spores are very inert and form a rigid cover that protects the cell wall during harsh conditions, by steam sterilization even the spores are killed.

Q9) Explain Media and its types?

A9) Media composition is a very important aspect in microbiology as it provides all the medium in which the organism can grow its also called as in vitro or lab propagation or growth of animal cells under controlled condition. Media composition is selective and requires a procedure required for an essential step to culturing of cells celled or media selection for appropriate growth of cells. The media contain all the essential nutrients to make it available for the cells to growth freely. Animal cells can use to both type of media can artificial media and natural media.

Artificial media-

This media is also called a defined media it contains all fully defined media components.  the media should be maintained to physiological pH at 7. Also, should be sterilized before use.

Natural media-

This media includes contents like body fluid like serum, plasma, amniotic fluid, etc. before usage the toxicity of the media has to be checked. Some selective media may also contain tissue extracts like liver, spleen etc.

Serum-free media- This media is free of serum and the main advantage of this media, is it can control the growth of organism by changes in the composition of media, for e.g. Cell differentiation.

Basic Components of a media include-

• A culture media has many constituents in the different amount which are essential to the growth of cells.
• Natural buffer- HEPES (chemical buffer) and phenol red as pH indicator.
• Inorganic salts- help in balance to the osmotic pressure of cells, like potassium, calcium etc.
• Amino acids– included for synthesizing proteins by cells.
• Carbohydrates– work as an energy source like glucose.
• Vitamins- for the proliferation and growth of cultured cells.
• Antibiotics– to avoid cells by infection through microbes like bacteria and viruses.

Q10) Explain Growth Kinetics in microorganisms?

A10) In autecological studies, the growth of bacteria (or other microorganisms) in batch culture can be modelled with four different phases: lag phase (A), log phase or exponential phase (B), stationary phase (C), and death phase (D).

During lag phase, bacteria adapt themselves to conditions for growth. It is the period where the individual bacteria are maturing and still are not yet ready to divide. During the lag phase of the bacterial growth cycle, synthesis of RNA, enzymes and other molecules occurs. The cells are usually dormant during this stage, in the lag phase changes that occur in the cell are very minute, because the cells do not immediately reproduce in a new medium. This period of little to no cell division is called the lag phase and can last for 1 hour to several days.

1. The log phase (sometimes called the logarithmic phase or the exponential phase) is a phase cell doubling occurs.  Per unit of time the number of new bacteria formed is proportional to the present population. If growth in bacteria is not limited, the cell doubling will continue at a constant rate so both the number of cells and the rate of population increase double number of times with each consecutive time period. A graph is plotted with the cell number against time which produces a straight and for this type of exponential growth. The slope of this line is a straight line and is the specific to the growth rate of the organism, which is a measure of the number of divisions per cell per unit time.  However, the actual rate of this growth (i.e. the slope of the line in the figure) depends upon the growth conditions, and controlled condition which affect the frequency of cell division events and the probability of both daughter cells to survive.

2. The stationary phase is often due to a growth-limiting factor such as the depletion of an essential nutrient medium, and/or the formation of an inhibitory product such as an organic acid. Mutations can also occur at this stage; at this phase a situation is formed in which growth rate and death rate are equal. The number of new cells formed is limited by the growth factor or inhibitory products and as a result the rate of cell growth matches the rate of cell death. The result is a “smooth,” horizontal linear part of the curve during the stationary phase.

3. At death phase (decline phase), bacteria eventually die. This could be caused by a number of factors like lack of nutrients, unfavourable environmental temperature or any other injurious conditions.