Unit 04

Question Bank

Q-1What are polymers?

Polymer chemists study large, complex molecules that are built up from many smaller units. They study about the smaller building blocks combine, and create useful materials with specific characteristics by manipulating the molecular structure of the monomers/polymers used, the composition of the monomer/polymer combinations, and applying chemical and processing techniques that can to a large extent, affect the properties of the final product. Polymer chemists are unique within the chemistry community because their understanding of the relationship between structure and property spans from the molecular scale to the macroscopic scale.

Q-2Explain different type of polymerization.

Polymers can be synthesized by the following polymerization processes:

1. Addition polymerization or chain polymerization
2. Condensation or step or step growth polymerization

III. Copolymerisation

Addition polymerization:

The addition polymerization is the process in which the liniking together of monomer molecules by a chain reaction is observed. Polymer synthesized by addition polymerization has the same empirical formula as that of monomer. No molecule is evolved during polymerisation and the polymer is an exact multiple of the original monomeric molecule. 

Condensation polymerization:

An intermolecular reaction involving two different bifunctional reactants with affinity for each other and taking place through repeated condensation reaction is known as condensation polymerization.

Copolymerisation:

Addition polymerisation involving a mixture of two or more suitable or compatible monomers gives a copolymer and the process is known as copolymerization. A reaction in which a mixture of two or more monomers is allowed to undergo polymerisation is known as copolymerization. The polymer is known as copolymer.

E.g.:  Copolymerization of styrene and methyl methacrylate

Q-3Explain thermoplastic polymers.

A thermoplastic is a resin that is solid at room temperature but becomes plastic and soft upon heating, flowing due to crystal melting or by virtue of crossing the glass transition temperature (Tg). Upon processing, usually via injection-molding or blow-molding-like processes, thermoplastics take the shape of the mould within which they are poured as melt, and cool to solidify into the desired shape. The significant aspect of thermoplastics is their reversibility, the ability to undergo reheating, melt again, and change shape. This allows for additional processing of the same material, even after being prepared as a solid. Processes such as extrusion, thermoforming, and injection molding rely on such resin behavior. Some common thermoplastic materials include polyethylene (PE), polycarbonate (PC), and polyvinyl chloride (PVC).

Q-4Explain thermosetting polymers.

A thermosetting resin, or thermosetting polymer, is generally a liquid material at room temperature which hardens irreversibly upon heating or chemical addition. When it is placed in a mould and heated, the most solidifies into the specified shape, but this solidification process includes the formation of certain bonds, called cross links, that hold the molecules in place and change the basic nature of the material, preventing it from melting. As a result, a there most, as opposed to a thermoplastic, cannot return to its initial phase, rendering the process irreversible. There most, upon heating, become set, fixed in a specific form. During overheating, there most tend to degrade without entering a fluid phase. Processes such as compression molding, resin transfer molding, pultrusion, hand lay-up, and filament winding depend on thermosetting polymer behavior.  Some common there most include epoxy, polyimide, and phenolic, many of which are significant in composites.

Q-5Give a brief idea on thermosetting and thermoplastic polymers.

Q-6Explain about the nylon-6.

Nylon 6 is also called as the Polycaprolactam which is developed by Paul Schlack. They are semicrystalline polyamide.They have smooth surface and are featureless as a glass rods. Nylon 6 can be modified using comonomers or stabilizers during polymerization to introduce new chain end or functional groups, which changes the reactivity and chemical properties. It's often done to change its dyeability or flame retardance. Nylon 6 is synthesized by ring-opening polymerization of caprolactam. When caprolactam is heated at about 533 K in an inert atmosphere of nitrogen for about 4–5 hours, the ring breaks and undergoes polymerization. Then the molten mass is passed through spinnerets to form fibres of nylon 6.

On further heating of Caprolactam at 533K with inert atmosphere of nitrogen for about 4-5 hours it gives

           (Nylon-6)

Application:

It is used in production of large variety of ropes, filaments, nets as well as knitted garments.

Q-7Explain the preparation of Bakelite.

Q-8Enlist the properties and applications of Bakelite.

Properties: It is very smooth to mold the Bakelite. Molding is very smooth and retains any shape. They are resistant proof, scratch proof.

Applications and uses of Bakelite:

• This element has a low electrical conductivity and high heat resistance
• It can be used in manufacturing electrical switches and machine parts of electrical systems.
• It is a thermosetting polymer and Bakelite has high strength meaning
• It basically retains its form even after extensive molding.

Phenolic resins are also extensively used as adhesives and binding agents. They are further used for protective purposes as well as in the coating industry.

Q-9Explain natural rubbers.

Natural Rubber is a high molecular weight hydrocarbon polymer represented by the formula (C5H8)x. It is obtained from a milk emulsion called latex by tapping the bark of the tree. “Heve a brasiliensis”. It is a polymer of isoprene units.

n H2C = C – CH = CH2 ( H2C – C = C – CH2 )n

CH3 CH3

The polymer chain of natural rubber is made of 2000 to 3000 monomer units.

Processing of Natural Rubber:- By cutting the bark of rubber tree the milky colloidal rubber milk is obtained. The main constituent of rubber latex is 25-45% of rubber and the remaining are water, protein & resinous materials. The rubber latex is coagulated by using 5% acetic acid and made in to sheets. The rubber sheets are cured under mild heat and then subjected to further processing.

Q-10What is vulcanization of rubber?

Vulcanization is a chemical process that converts natural rubber and other polydiene elastomers into cross-linked polymers. The most common vulcanization agent is sulfur. It forms bridges between individual polymer molecules when heated with rubber. Often a catalyst and initiator is added to accelerate the vulcanization process. The cross-linked elastomers have much improved mechanical properties. In fact, unvulcanized rubber has poor mechanical properties and is not very durable.

• Mixing of crude rubber with about 5-30% of sulfur (cross-linking agent) and other additives such as:
  • Activator (commonly zinc oxide or stearic acid),
  • Accelerator (guanidines, thiazoles, dithiocarbamates, xanthates, thiurams) ,
  • Coagulants (acetic acid, calcium chloride),
  • Anti-oxidants (amines, phenolics, phosphites),
  • Color pigments,
  • Surfacants,
  • Softeners,
  • Ant-foaming agents,
  • Anti-tack agents (Rosin derivates, coumarone-indene resins, aliphatic petroleum resins, alkyl-modified phenol-formaldehyde resins).

Slow cross-linking starts at this stage. It is neccessary to avoid active vulcanization during mixing, which may cause cracks formation at the molding stage.

• Molding (shaping) the rubber mixture. The rubber must be shaped prior to heating stage since cross-linking makes shaping impossible.

Heating the mixture to 250-400ºF (120-200ºC). Increased temperature speeds up the vulcanization process resulting in fast and complete cross-linking. C-S bonds replace C-H bonds linking chain poly-isoprene molecules. Each link is formed by one to seven sulfur atoms.

Q-11Buna-S synthetic rubber and its applications.

Buna-S is also known as the styrene-butadiene. It is a copolymer of butadiene (75%) and styrene (24%).  Buna is derived from the Bu-Butadiene while Na is Sodium or Natrium and S is Styrine. Buna-S is the replacement of natural rubber while styrene, 2 monomers and butadiene play a major role in its derivation where as these 2 monomers is polymerized by two basically different process i.e., from solution (S-SBR) or as an emulsion (E-SBR). It is prepared by the copolymerization of butadiene & styrene.

It is a random co-polymer formed by the emulsion polymerization of a mixture of 1:3 butadiene and styrene in the presence of peroxide as a catalyst at 5o C and this is the reason why the product is called as cold rubber. The obtained rubber is called as the Styrene Butadiene Rubber (SBR).

Applications:

(i)                Buna-S is used as the natural rubber i.e., they are widely used in pneumatic tyres.

(ii)              SBR is extensively used in coated papers.

(iii)           They are highly used in building materials as a binding material.

SBR is also used as binder in lithium-ion battery electrodes.

Q-12Explain in brief about thiocol and its application and properties.

Thiocol is prepared by the condensation polymerization of sodium poly sulphide (Na2Sx) and ethylene dichloride (Cl CH2 CH2 Cl). In these elastomers, sulphur forms a part of the polymer chain.

Cl – CH2 – CH2 – Cl + Na – S – S – Na + Cl – CH2 – CH2 – Cl

(CH2 – CH2 – S – S – CH2 – CH2 )n + NaCl Thikol

Properties:-

(1) These rubbers possess strength and impermeability to gases.

(2) This rubber cannot be vulcanized because its structure is not similar to   natural rubber and it cannot form hard rubber.

(3) It possesses extremely good resistance to mineral oils, fuels, oxygen, solvents ozone & sunlight.

Applications:-

(1) Fabrics coated with Thiokol are used for barrage balloons

(2) It is mainly used as solid propellant fuel for rocket

(3) It is also used for making gaskets, hoses, cable linings, tank linings etc.

(4) It is also used for printing rolls

(5) Containers for transporting solvents

6) Diaphragms and seats in contact with solvents.

Q-13What are lubricants?

Lubricants are the fluid, solid or plastic substance that is helpful in the control of friction by the introduction of friction-reducing film between moving surfaces in contact. There are many different forms of the substance which is helpful in lubrications. The most common substances that are used is oil and grease. Grease is composed of oil and a thickening agent to obtain its consistency, while the oil helpful in lubrication.

Q-14What is hydrodynamic lubrications?

(i)                Fluid Film or Hydrodynamic Lubrication:

The shaft rotating in a bearing is supported by a layer or wedge of oil so that the shaft is not in contact with the bearing material. It is carried out with the help of liquid lubricants. In this mechanism, two moving and sliding surfaces are separated by thick film of lubricant fluid of about 1000A°, applied to prevent direct surface to surface contact and consequently reduce wearing and tearing of metals. Therefore it is known as thick film or fluid film lubrication or hydrodynamic lubrication. In this case fluid is formed by mixing of hydrocarbon oils and anti-oxidants with long chain polymer so as to maintain viscosity. Fluid film lubrication is useful in delicate and light machines like watches, clocks, guns, scientific equipments.

Lubrication film between the two contact surfaces is thick enough and two contact surfaces are separated completely by viscous oil film. At this time, frictional force of two contact surfaces are determined by viscous resistance of lubricant and it can take a very small value. Under this condition, when shaft also rotates due to the viscosity of the lubricant oil and generates oil pressure at the load area. This phenomenon is called wedge effect. The oil pressure P generated within lubricating oil film is affected by change of temperature and viscosity of lubricating oil, surface roughness, clearance and rotational speed of the shaft.

Q-15Explain about the boundary lubrications.

It is carried out with grease and graphite & molybdenum disulphide lubricants. Boundary lubrication is a condition in which the lubricant film becomes too thin to provide total separation. In this type of lubrication a thin film of lubricant is adsorbed on the surface by weak Vander Waals forces. Thin film lubrication is operating at relatively low speed and high pressure. Lubricating oil film between the two contact surfaces is extremely thin and no viscous hydrodynamic oil film exists between the two contact areas, only film of absorbed oil molecules exists.

Absorptive oil film is arranged oil molecules that are adhered onto the solid surfaces and its shear resistance is greater than hydrodynamic oil film. Frictional force in this area is greater compare to hydrodynamic lubrication. In the frictional contact points, oil film is frequently broken. The lubrication condition that generates a frictional condition such as this is called boundary lubrication; in order to decrease the friction under this condition selection of self-lubricating bearing may be desirable.

Q-16What are lubricating oils?

It plays the major role in reduction of friction between two moving metallic surfaces. The lubricating oil provides the fluid film in between the metallic surfaces those results in the friction reduction. Lubricants also act as the cooling medium, corrosion preventer.

Poroperties:

(i)                They posses low pressure or high boiling point

(ii)              Adequate viscosity for particular service condition

(iii)           High oxidation resistance

(iv)            They non-corrosive properties

Q-17What are semi-solid lubricants?

Lubricating grease is a semi - solid, consisting of a soap dispersed throughout liquid lubricating oil. The liquid lubricant may be petroleum oil or even synthetic oil and it may contain any of the additives for specific requirements. Greases are prepared by saponification of fat with alkali, followed by adding hot lubricating oil while  under agitation. The total amount of mineral oil added determines the consistency of the finished grease. The structure of lubricating greases is that of a gel. Soaps are gelling agents, which give an interconnected structure containing the added oil. At high temperatures, the soap dissolves in the oil, whereupon the interconnected structures cease to exist and the grease liquefies. Consistency of greases may vary from a heavy viscous liquid to the of a stiff solid mass. To improve the heat-resistance of grease, inorganic solid thickening agents (like finely divided clay, bentonite, colloidal silica, carbon black, etc.) are added.

Greases have higher shear or frictional resistance than oils and, therefore, can support much heavier loads at lower speeds. They also do not require as much attention unlike the lubricating liquids. But greases have a tendency to separate into oils and soaps.

Grease is used:

(i)                          in situations where oil cannot remain in place, due to high load, low speed, intermittent operation, sudden jerks, etc. e.g. Rail axle boxes, 

(ii)                        in bearing and gears that work at high temperatures

(iii)                      in situations where bearing needs to be sealed against entry of dust, dirt, grit or moisture, because greases are less liable to contamination by these

In situations where dripping or spurting of oil is undesirable, because unlike oils, greases if used do not splash or drip over articles being prepared by the machine. For example, in machines preparing paper, textiles, edible articles, etc.

Q-18Explain graphite, its structure and applications.

It is an allotropic form of the carbon atom (Allotropy form- When any element is formed in more than one form and in each form they posses different property). In graphite carbon are arranged in hexagonal ring form and each form is arranged upside down to form the layer and are attached together by weak Vander-wall’s forces. Graphite is the most stable form of the carbon. It is the good conductor of heat and electricity. The two major known form of graphite are alpha (Hexagonal) and Beta (Rhombohederal).

Structure:

The carbon atom is sp2 hybridized that means there is 4 valence electron in their outermost shell as in the diamond the all 4 valence electron are covalently bonded while in graphite the 3 electron makes a covalent bond while the remaining 1 electron are free. The interconnection of these carbon atoms forms the hexagonal structure. The C-C bond bond length is 1.42 Angstrom. This hexagonal layer attached toward each other by weak Vander Wall forces at a distance of 3.35 Angstrom. This is the reason why graphite is soft.

Properties:

Conducting Property: As the carbon of Graphite are sp2 hybridized that means the p orbital remain vacant of the carbon atom this tend to overlapping of the vacant P-orbital. This overlapping of the vacant orbital is responsible for the movement of electrons in parallel on their vacant orbital that is why Graphite shows the conducting property.

Lubricating Property:  There is presence of weak Vander Wall forces between two layers due to these weak forces the two layers are flexible in nature which in result make the Graphite to be used for Lubricating purpose.

Applications:

1-Graphite can be used as the solid lubricant

2-Graphite can be used as conductor.

3-Graphite can be used as the electrodes.