Shivaji University, Maharashtra, Computer Engineering Semester 2, Engineering Graphics Syllabus

Engineering Graphics Lecture notes | Videos | Free pdf Download | Previous years solved question papers | MCQs | Question Banks| Syllabus
Get access to 100s of MCQs, Question banks, notes and videos as per your syllabus.
Try Now for free

Unit - 1 Fundamentals of Engineering Graphics& Engineering Curves

UNIT 1

Fundamentals of Engineering Graphics Engineering Curves

1.1 Tracing paper

1.2 Thumbtacks

1.3 Pencils

1.4 Pencil Pointer

1.5 Erasers

1.6 Penholders and Pens

1.7 Triangles

1.8 The T squares

1.9 Curves

1.10 The Case Instruments

1.11 Divider

1.2 Layout of drawing sheets

1.3 Different types of lines used in drawing practice

1.4 Dimensioning system as per BIS Theoretical treatment only

1.5 Construction of regular polygons up to hexagon. Construction of Ellipse –DirectrixFocus Arcs of circle Method ParabolaDirectrixFocus Rectangle Method Hyperbola DirectrixFocus Rectangular Method Involutes Archimedian spiral and Cycloid only.

Unit - 2 Projections of lines & Planes

UNIT 2

First and third angle projections

2.2 Projections of points on regular reference planes. Projections of horizontal frontal and Profile lines on regular and auxiliary reference planes. Projection of oblique lines it’s True length and angle with reference planes by rotation and auxiliary plane method. Concept of grade and bearing of line.

2.3 Projections on regular and on auxiliary reference planes. Types of planes horizontal frontal oblique and Profile planes. Edge view and True shape of a Plane. Angles made by the plane with Principle reference planes. Projections of plane figures inclined to both the planes. Circle and regular polygon

Unit - 3 Projections of solids

UNIT 3

Projections of solids

3.1 Projections of Prisms Pyramids Cylinder and Cones inclined to both reference planes Excluding frustum and sphere

Unit - 4 Orthographic Projections

UNIT 4

Orthographic Projections

4.1 Lines used Selection of views spacing of views dimensioning and sections

4.2 Drawing required views any two views from given pictorial views Conversion of pictorial view into orthographic view including sectional orthographic view

Unit - 5 Isometric projections

UNIT 5

Isometric projections

5.1 Introduction to isometric Isometric scale Isometric projections and Isometric views drawings. Circles in isometric view. Isometric views of simple solids and objects.

Unit - 6 Development of plane and curved surfaces

UNIT 6

Development of plane and curved surfaces

6.1 Development of plane and curved surfaces of the solids Prisms Pyramids Cylinders and Cones along with cutting planes Solids in simple position only.

Download CSE Sem 2 syllabus pdf
Get access to 100s of MCQs, Question banks, notes and videos as per your syllabus.
Try Now for free
Other Subjects of Semester-2
Applied mechanics
Engineering physics
Engineering chemistry
Basic civil engineering
Basic electrical engineering
Basic mechanical engineering
Fundamentals of electronics and computer programming
Popular posts
Top 10 free online resources to learn coding
What is machine learning
What is cloud computing
What is DBMS architecture
Sorting algorithm overview
Share  
Link Copied
More than 1 Million students use Goseeko! Join them to feel the power of smart learning.
Spot anything incorrect? Contact us